Solar inverter installation is not able to be installed in the exposed environment, especially the rain will lead to moisture is not possible, is not allowed to solar inverter power supply above any water.Solar inverter temperature environment should be controlled in the range of 1-40 degrees Celsius, can not be higher than it or lower than it.Solar inverters should also not be placed in the middle of objects that are easy to burn, and should not be placed in places that are easy to touch dust.
If the cable is very long do not use, but you need to put the inverter and battery isolation, battery is also not exposed to the outside, the generated gas is a very strong corrosive, if the time is very long will damage the inverter inside.Inverter is connected with the ground of place will directly connected to the load, the power is the ability to control their own technology, one of the basic circuit is very simple, but the content of their output with ningbo is very big, is because the current is very big, after the transfer out to their own multiple power supply of the content of a design is very small, won a very wide application.
Inverter are sometimes used in the car, so security is also very important, the design of the product is reasonable is not only a relationship with electrical safety, is also concerned about the safety of the people, from a higher level, is also the relationship between the driving and riding statement, let's say the security vehicle inverter.
We must choose a product of metal shell, vehicle-mounted inverter power is relatively large, fever is also very much, if the internal heat stays in the car, is the birthday noodles will make inverter is reduced, if severe and there will be a fire risk, if choose metal is has very good heat dissipation, also won't burn myself, if choose plastic is no way to avoid these things.In order to save costs, some products on the market will be made of plastic in appearance. Such products will dissipate heat on the fan, and will not be recommended for selection. There will be a lot of noise in the fan, which will affect the comfort level.
For the sake of our safety consideration, is to choose types of fission products, don't choose the integration of the thing, because it exists many shortcomings, first of all, is the location of the car cigarette lighter is not very thorough, general inverter are in the back didn't appear, in the process of the form will appear unstable because of poor contact, there is a place for it will be very long, if on these things just will directly affect the operation of their shift in, this is possible and driving safety is relationship, both safety and convenience are shouldn't choose solar inverter.
The load is classified into resistive load, inductive load and capacitive load.Resistive load: the load with no phase difference between current and voltage is resistive load, such as rice cooker, light bulb, electric stove, electric soldering iron, etc.I
Solar power generation is a new field of energy conservation and environmental protection. It is a hot project in the world and has become a photovoltaic power generation. At present, distributed photovoltaic power generation has become a pension investme